alfworld-tool-locator

Instructions

Locate a specified tool or device by systematically checking receptacles where it is likely stored.

Workflow

1. Prioritize search locations based on tool type:
2. Small tools/electronics (desklamp, remotecontrol): sidetable, desk, drawer, shelf
3. Kitchen tools (knife, spatula): countertop, cabinet, drawer
4. Cleaning tools (sponge, spraybottle): shelf, cabinet, countertop
5. Default: check all visible receptacles in order
6. Navigate to each prioritized receptacle: go to {receptacle}
7. Inspect the observation for the target tool name
8. If found: Stop searching. Proceed to use the tool for the main task
9. If not found: Continue to the next receptacle in the priority list
10. If exhausted: Expand search to remaining receptacles not yet checked

Action Format

• go to {receptacle} -- navigate to check a location
• take {tool} from {receptacle} -- pick up the tool once found (if needed)
• use {tool} / toggle {tool} -- operate the tool in place (e.g., desklamp)

Error Recovery

• If "Nothing happened": verify the receptacle name matches the environment scan
• If tool not found after all likely spots: expand search to every receptacle from the initial environment scan

Example

Scenario: You need to find a desklamp to examine an object.

Thought: I need to find a desklamp. Desklamps are usually on sidetables or desks.
Action: go to sidetable 1
Observation: On the sidetable 1, you see a keychain 1.
Thought: No desklamp here. Let me check the next sidetable.
Action: go to sidetable 2
Observation: On the sidetable 2, you see a desklamp 1.

Result: Found desklamp 1 on sidetable 2. Proceed to use it for the task.