scienceworld-conductivity-tester

@zjunlp · 收录于 5 天前 · 上游提交 2 周前

Determines if an object is electrically conductive by integrating it into a circuit and observing a light bulb. Triggered when classifying an object based on conductivity.

场景物理实验电路教学

适合你，如果需要在科学实验中判断物体导电性。

/ 下载安装

https://github.com/zjunlp/skillnet/tree/main/experiments/src/skills/scienceworld/scienceworld-conductivity-tester ↗

/ 通过 npx 安装 校验哈希

npx oh-my-skill add zjunlp/skillnet/scienceworld-conductivity-tester

/ 通过 bash 安装

curl -fsSL https://oh-my-skill.com/install.sh | bash -s -- zjunlp/skillnet/scienceworld-conductivity-tester

/ 已经装过?验证本机副本,不用重装

npx oh-my-skill verify zjunlp/skillnet/scienceworld-conductivity-tester

安装目标可用 --agent / --scope 或 --to 明确指定;省略时只会在唯一已存在的 agent 目录上自动选择,零命中或多命中会停止并提示。content_hash 缺失或不一致均拒装。

1112GitHub stars

~437最小装载

~437含声明引用

~560文本包总量

索引托管

怎么用

商店整理自技能原文 · 版本 7bb9a48 · 表述以原文为准

它做什么

当你要判断一个物体是否导电时，Claude 会用该物体连接电池和灯泡组成电路，然后观察灯泡是否发亮。如果灯泡亮，物体是导体，放入蓝色箱子；否则放入橙色箱子。

什么时候触发

当你要求 Claude 根据导电性对一个物体进行分类时触发。

装好后可以这样说

Claude 会搭建电路并用铜棒连接，查看灯泡是否亮。

Claude 会用木棍替代测试，观察灯泡状态。

技能原文 SKILL.md作者撰写 · MIT · 7bb9a48

Instructions

Objective

Classify a target object as electrically conductive or non-conductive by using it to complete a simple circuit with a battery and a light bulb.

Core Procedure

Locate & Acquire Object: Teleport to the object's location and pick it up.
Focus on Object: Use the focus action on the object to signal intent.
Setup in Workshop: Teleport to the workshop. Place the object down.
Construct Test Circuit: Assemble the circuit on the table in this exact sequence: a. Connect the battery anode to orange wire terminal 1. b. Connect the battery cathode to yellow wire terminal 1. c. Connect orange wire terminal 2 to the blue light bulb cathode. d. Connect green wire terminal 2 to the blue light bulb anode. e. Connect yellow wire terminal 2 to terminal 1 on the target object. f. Connect green wire terminal 1 to terminal 2 on the target object.
Observe & Classify: Wait 2 steps (wait1 twice). Then look around.
If the blue light bulb is ON, the object is conductive. Place it in the blue box.
If the blue light bulb is OFF, the object is non-conductive. Place it in the orange box.

Key Notes

The workshop contains all necessary components: battery, wires (orange, yellow, green), and light bulbs.
The circuit is fragile; connect components in the order specified.
The observation (look around) after waiting is critical for determining the bulb's state.
This skill assumes the environment's action set and room structure as provided in the trajectory.

按 MIT 许可原样转载,未经改动 · 在 GitHub 查看 →

登录即可评论;带「已验证安装」的,是发布者名下有本店的安装或持有记录。

…